Instructions

Retrieval

1. Hold reel in left or right hand using centre rotating handle (a)
2. Attach end of material being handled to inner retainer hook (b) or through either hole (c)
3. Rotate reel clockwise with other hand using winder knob (d) until fully retrieved

Deployment

1. To deploy material hold rotating handle (a) with left or right hand and pull on material free end

** WARNING **
Power supply cables must be fully unwound
before use & to prevent impact injury do not have loose cable or
hose protruding through spool when deploying or retrieving

Communications or Data Cable

1. Remove inner retainer hook (b) to eliminate interference with cable
2. Pull 2 or 3 metres of cable through either hole (g) or (c) and wind tightly around face of spool using cable retainers (e)
3. Attach free end using any hole (f) at outer rim
4. Wind cable onto reel as per instructions until desired capacity reached
5. Retain free end using any hole (f) at outer rim

For the handling of the following Communication or Data Cables: Don 10 cable, WD-1/TT cable, WD-1A/TT cable, WF-16/U cable, WF-8/G cable, Cat 5 cable, Cat 6 cable, Cat 7 cable, Optical Fibre cable, Firing cable AWG number 18, Detonator cable, Audio/Video cable, Microphone cable, Telephone cable, wire, etc

Stacking & Capacities

The Ruslyn Cordwheel® has a unique design which allows reels to be stacked together for transport in boxes and racking for storage.
When stacking reels, do not fill spool above winder knob cut out (h)